This driver bento kit is a configurable B2B concept for trucking fleets and driver meal programs. Original images visualize one consistent three-dining set; they do not represent a verified production SKU, customer order, certification or performance result. Final dimensions, materials, cab compatibility, cleaning, restraint, weight, volume, tooling, MOQ, sampling and lead time are to be confirmed.
The Three-Meal Driver Bento Kit With Cab Console Case combines exactly three low-profile divided PP boxes—muted amber, olive green and deep navy—with charcoal lids, one stainless fork-and-spoon pair in a gray sleeve, and one graphite semi-rigid vertical case with three padded shelf positions, a top handle and an empty side pocket.
Product Contents
Driver Bento Kit Designed For
The driver bento kit is designed for one driver and up to three planned meal periods in long-haul, regional, sleeper-cab and fleet-depot programs. Color coding can support meal sequence, but operational labels and food controls remain the responsibility of the buyer’s program.
One driver and three controlled meal periods.
Long-haul, regional, sleeper-cab and depot-issued meals.
Three boxes and lids, one utensil pair and sleeve, and one three-shelf case.
Cab fit, accessible storage, replacement control and depot turnaround.
No universal leak, microwave, freezer, dishwasher, impact, stain or temperature-performance claim is made. Validate the final construction against intended food, cleaning and handling conditions.
Driver Bento Kit Set Configuration
The amber, olive and navy boxes share a slim rectangular divided format with charcoal lids. Each box occupies one padded horizontal shelf. The utensil sleeve fits a dedicated inner-door pocket, while the outer side pocket remains undefined until the fleet approves its contents. Every driver bento kit requires a controlled bill of materials, drawing revision, color references and packing instruction.
Compatibility is to be confirmed by project sample and drawing. A change to box geometry, lid, divider, shelf or sleeve requires a new fit review. Replacement parts should carry individual codes and match the approved revision.
Before Packing → Packed → Carrying
Before packing, count three box bodies, three lids, the fork, spoon, sleeve, shelves and case. Close every box using the approved check, then load amber, olive and navy boxes in the specified order. Place the sleeve in its pocket and close the zipper without forcing walls or shelves.
The loaded case must use the fleet’s approved carrying and travel-restraint procedure. Product imagery does not authorize seat or console placement while a vehicle is moving. Confirm total packed weight and handling only with the final physical sample.
Product Parameters Packed Size Weight and Volume
| Box format | Slim rectangular divided PP body with charcoal lid; final geometry to be confirmed. |
|---|---|
| Set quantity | Three boxes, three lids, one fork-and-spoon pair, one sleeve and one case. |
| Proposed materials | Food-grade PP, stainless steel and textile/foam case construction; exact specifications to be confirmed. |
| Packed size | To be confirmed after final box, shelf and case approval. |
| Weight and volume | To be confirmed from the approved complete physical sample. |
| Stackability / nesting | Alignment, lid contact, shelf clearance and removal stability to be confirmed. |
| Cab compatibility | To be confirmed in every vehicle family in scope. |
Carry Bag Internal Layout
The graphite case is proposed with three padded shelf positions, a narrow utensil pocket, reinforced top handle, zipper opening and one empty outer pocket. Final shell, textile, foam, lining, shelf attachment, stitching, zipper and handle construction remain subject to approval.
Review the open and closed case in the smallest relevant storage position. Check box access, shelf sag, closure clearance, loaded balance and repacking. Define how the case is cleaned, dried and inspected separately from food-contact items.
Materials for the Driver Bento Kit
Food-grade PP is proposed for box bodies and lids, stainless steel for the fork and spoon, and textile/foam constructions for the sleeve and case. Exact resin, additives, pigments, steel grade, finish, fabric composition, padding, lining, coatings, thread and hardware must be confirmed by component.
Food-contact evidence should match the exact selected SKU, color, intended use and destination market. Buyers can review the FDA food-contact substances overview and the European Commission food-contact materials framework when defining evidence. These sources do not certify this concept.
Logo Pantone and Packaging Customization
Potential routes include printing or molded identification on PP, laser marking on stainless steel, woven or printed textile labels and graphics on paper bands or cartons. Feasibility depends on surface and process. Pantone targets require physical approval on plastic, textile, steel and paper.
Packaging can be reviewed as bulk master cartons, plain kraft inner cartons, recyclable belly bands or divider inserts. Define barcode, component count, handling instructions and market information before artwork approval. Trial the complete pack because inserts affect size and unpacking time.
Replaceable Components and Custom Molding
Boxes, lids, dividers, utensils, sleeve, shelves and case can be managed as replacement items. Existing components should be evaluated first. Modified geometry or custom tooling may be considered when compartment use, cab envelope or shelf fit cannot be met with available parts. Tooling feasibility, cost and timing are to be confirmed after drawings and expected volume are available.
MOQ Sampling and Lead Time
| MOQ | To be confirmed by configuration, color split, decoration, packaging and assembly route. |
|---|---|
| Sampling | To be confirmed after cab constraints, drawings and approval stages are defined. |
| Lead time | To be confirmed after samples, testing, quantity, packaging and shipping plan are approved. |
| Custom tooling | Reviewed after drawings, tolerances and expected volume are available. |
SKU-Level Quality Inspection and Compliance Records
Potential inspection points include component count, dimensions, visual condition, lid fit, divider condition, shelf clearance, box removal, loaded balance, zipper and handle operation, utensil finish, sleeve construction, logo position, color reference, packaging and complete-set verification.
Keep the accepted sample, drawings, bill of materials, artwork, packing instruction, evidence list and inspection criteria on one revision. Unknown fields remain “To be confirmed for the project.” Read the long-haul driver meal kit fleet guide for cab-fit, operating and supplier-comparison logic.
Driver Bento Kit FAQ
What is included?
Three divided PP boxes and lids, one stainless fork-and-spoon pair, one textile sleeve and one semi-rigid three-shelf case.
Are dimensions and weight confirmed?
No. They are confirmed after the boxes, shelf clearances, case construction and physical sample are approved.
Can colors logos and packaging be customized?
Yes, subject to material and process feasibility, artwork review, sample approval and commercial confirmation.
What are the MOQ and lead time?
They are confirmed after configuration, colors, decoration, packaging, testing and quantity are defined.
Compare Lunch Boxes and Bento Sets, review Food-Grade PP, and see the Custom Lunch Box Set With Insulated Carry Bag for another portable lunch direction.
Build a Similar Driver Bento Kit
Share route types, cab families, meal periods, storage limits, cleaning process, branding, packaging, target markets, quantity and schedule. The B2B team will identify existing-component and custom-development routes.
Open the Fleet Project Inquiry
